GPX205R
MODEL:GPX205R
X Pol Panel Antenna 790-960MHz 33° 17.5dBi 0°-14° RET

规格
Electrical Specifications
Frequency Range (MHz): |
790-960(R1) |
||
790-862 |
862-894 |
894-960 |
|
Gain (dBi): |
16.5±0.5 |
17.2±0.5 |
17.5±0.5 |
Return Loss (dB): |
>14 (VSWR<1.5) |
||
Polarization: |
±45° |
||
Horizontal 3dB beamwidth (°): |
38 |
35 |
32 |
Vertical 3dB beamwidth (°): |
16 |
14.5 |
13 |
Electrical Downtilt (°): |
0°-14° Independently Continuously Adjustable |
||
RET Type: |
Cascade SRET, AISG 2.0, Upgradeable |
||
1st Upper Sidelobe Level (dB): |
15 |
15 |
15 |
Front to Back Ratio @180±30°(dB): |
23 |
24 |
25 |
Cross Polar Ratio 0° (dB): |
15 |
15 |
15 |
Cross Polar Ratio ±15° (dB): |
10 |
10 |
10 |
Isolation Port to Port (dB): |
>28 |
||
Max. Power Per Port (W) |
250 |
||
Intermodulation IM3 (dBc): |
<-150 (2×43 dBm) |
||
Impedance (ohm): |
50 |
||
Lightning Protection: |
DC Grounded |
||
Connector Type: |
2×7/16 DIN Female |
BASTA Electrical Specifications
Frequency Range(MHz): |
790-960(R1) |
||
790-862 |
862-894 |
894-960 |
|
Average Gain by Beam Tilts (dBi): |
0°|16.65 7°|16.39 14°|16.07 |
0°|16.94 7°|16.54 14°|16.21 |
0°|17.26 7°|16.83 14°|16.45 |
Gain by all Beam Tilts Tolerance(dB): |
±0.35 |
±0.42 |
±0.53 |
Horizontal Beamwidth Tolerance(°): |
±1.42 |
±1.61 |
±2.27 |
Vertical Beam width Tolerance(°): |
±0.92 |
±0.48 |
±0.89 |
Upper Side Lobe Suppression, Peak to 20°(dB): |
15.19 |
15.06 |
15.32 |
Front to back Total Power at 180° ± 30°(dB) |
25.01 |
27.55 |
25.97 |
CPR at Boresight(dB): |
17.54 |
21.10 |
15.78 |
Mechanical Data
Antenna Dimensions (mm) : |
1400×448×145 |
Packing Dimensions (mm) : |
1685×530×235 |
Antenna Net Weight /Bracket (kg) : |
16.5/5.9 |
Antenna Gross Weight (kg) : |
26.5 |
Radome Material: |
Fiberglass |
Pipe OD (mm): |
55-114 |
Mounting Kits (Included): |
BA.K.04.00069131, Adjustable Downtilt 0°-16° |
Environmental Ratings
Humidity: |
95%RH@+30℃ |
Temperature (℃): |
-40~+70 |
Wind Load @150 km/h (N): |
Frontal/ Lateral/ Rearside: 833/119/926 |
Max. wind velocity (km/h): |
200 |
Internal RET Specifications
RET type: |
Integrated RET |
RET protocol: |
AISG 2.0 /3 GPP |
Input voltage range(V): |
10-30 DC |
Power consumption(W): |
< 5 (motor activated , single RET) < 1 (standby, single RET), < 1.5 (standby, 12V) |
Adjustment time (full range) (s): |
< 120 (typically, depending on antenna type) |
RET connector: |
1 pair of AISG 8 pin male & female |
Pin assignment according AISG: |
8 pin circular connector conforming to IEC 60130-9 - Ed. 3.0 |
Lightning protection (kA): |
5 (8/20 μs Differential mode), 8 (8/20 μs Common mode) |