UPX209P-E2-C
MODEL:UPX209P-E2-C
X Pol Panel Antenna 698-960MHz 33° 19.5dBi 2°-12° Replaceable RET

规格
Electrical Specifications
Frequency Range (MHz): |
698-960(R1) |
||
698-862 |
862-894 |
894-960 |
|
Gain (dBi): |
18.0±0.5 |
18.7±0.5 |
19.2±0.5 |
Return Loss (dB): |
>14 (VSWR<1.5) |
||
Polarization: |
±45° |
||
Horizontal 3dB beamwidth (°): |
39 |
35 |
30 |
Vertical 3dB beamwidth (°): |
9.2 |
8.0 |
7.0 |
Electrical Downtilt (°): |
2-12 Independently Continuously Adjustable |
||
RET Type: |
Cascade SRET, AISG 2.0, Upgradeable |
||
1st Upper Sidelobe Suppression (dB): |
15 |
15 |
15 |
Front to Back Ratio @180±30°(dB): |
24 |
24 |
25 |
Cross Polar Ratio 0° (dB): |
15 |
15 |
15 |
Cross Polar Ratio ±15° (dB): |
10 |
10 |
10 |
Isolation Port to Port (dB): |
>28 |
||
Max. Power Per Port (W): |
250 |
||
Intermodulation IM3 (dBc): |
<-150 (2×43 dBm) |
||
Impedance (ohm): |
50 |
||
Lightning Protection: |
DC Grounded |
||
Connector Type: |
2×4.3-10 Female |
BASTA Electrical Specifications
Frequency Range(MHz): |
698-960(R1) |
||
698-862 |
862-894 |
894-960 |
|
Average Gain by all Beam Tilts (dBi): |
18.24 |
18.65 |
19.12 |
Gain by all Beam Tilts Tolerance(dB): |
±0.53 |
±0.35 |
±0.61 |
Average Gain by Beam Tilt (dBi): |
2°|18.30 7°|18.23 12°|18.17 |
2°|18.75 7°|18.66 12°|18.36 |
2°|19.22 7°|19.10 12°|18.85 |
Horizontal Beamwidth Tolerance(°): |
±2.77 |
±2.94 |
±2.53 |
Vertical Beamwidth Tolerance(°): |
±0.57 |
±0.62 |
±0.59 |
1st Upper Sidelobe Suppression (dB) : |
15.35 |
15.62 |
15.53 |
Front to back Total Power at 180° ± 30°(dB): |
24.84 |
25.18 |
25.84 |
CPR at Boresight(dB): |
20.29 |
19.09 |
16.99 |
Mechanical Data
Antenna Dimensions (mm) : |
2490×498×197 |
Packing Dimensions (mm) : |
2760×585×290 |
Antenna Net Weight (kg) /Bracket (kg): |
30.5/5.9 |
Antenna Gross Weight (kg) : |
42.5 |
Radome Material: |
Fiberglass |
Pipe OD (mm): |
50-114 |
Mounting Kits (Included): |
BA.K.04.00069091, Adjustable Downtilt 0°-10° |
Environmental Ratings
Humidity: |
95%RH@+30℃ |
Temperature (℃): |
-40~+70 |
Wind Load @150 km/h (N): |
Frontal/Lateral/Rearside: 2196/460/2315 |
Max. wind velocity (km/h): |
150 |
RET type: |
Replaceable RET |
RET protocol: |
AISG 2.0 /3 GPP |
Input voltage range(V): |
10-30 DC |
Power consumption(W): |
< 5 (motor activated, single RET) < 1 (standby, single RET), < 1.5 (standby, 12V) |
Adjustment time (full range) (s): |
< 120 (typically, depending on antenna type) |
RET connector: |
1 pair of AISG 5 pin male & female |
Pin assignment according AISG: |
8 pin circular connector conforming to IEC 60130-9 - Ed. 3.0 |
Lightning protection (kA): |
5 (8/20 μs Differential mode), 8 (8/20 μs Common mode) |